Scarf → Kaftan

I had a very nice white cotton scarf with gold tassels in my altering pile...it was there because it was a summer scarf, but it seemed way too wide and so was a bit hot to wear when it was warm. But I hadn't got around to making it narrower. And with a sunny holiday looming, I needed a kaftan for lobbing over my swimsuit and so I made a different plan...

  

First I folded the scarf in half. To make side seams, I sewed two lines about 20cm in from each outside edge. I left a space of about 30cm at the top to put my arms through.

Then I measured across the top fold to find the middle. I slowly and carefully trimmed a hole to put my head through. Just a slight curve for the back neckline and a not-too-deep V at the front.

 

Then I stitched some gold bias binding on to the wrong side of the neck opening, stitching in the fold as I opened it out. Purchased bias binding makes the process very quick and easy. Before getting back to the start, I stitched the two pieces of bias binding right sides together, so that when I turned it to the front, there would be a neat seam. 

                           So I folded the bias binding over to the front and top-stitched it in place.   

 

And that was it: ready now for some beach weather and holiday fun!

  

                                

                                       From this...

...to this!

  

   

Re-modelling: a skirt from a dress!

Not having posted anything textiles-related in a while, I thought I'd highlight a little project from last year. My sister was kind enough to buy a vintage dress for me but it just didn't look right, especially the bodice section but we both loved the sun-ray pleated skirt.

After deliberation and discussion, we hit on the idea of chopping the top off altogether and using the bottom section to make a skirt. And I'm so lucky - Sister C, such a clever sewer, did the hard work for me. It was decided it would be simplest to cut it above the waist seam to make use of the elasticated waist. So the raw edge was then overlocked and hand stitched to the elastic on the wrong side. The tie was already there so C made some rouleau loops (and if making them is not an old skill, it's an advanced one and I have never done them) to attach the tie to the skirt. 

 

In cooler weather I've worn it with cardies and boots, and in summer with a T-shirt and white "fashion sneakers" or sandals. It's been so easy to wear - a really successful example of upcycling/remodelling/transformation! What continues to amaze me are the lovely comments I get every time I wear it - thanks C! 

A Madonna costume...

The John-Paul Gaultier cone corsets would have to be one of the most iconic costumes that Madonna has worn. So with a group of us going to the concert and the call out to wear something suitably "Madonna-esque" I decided to take on the challenge.

I didn't start till just a few days before so I spent a fair bit of time thinking about how I'd tackle it. Purchasing the fabric and other bits and pieces didn't take long - it was just a rush of two nights sewing at the end!

But when I went to start, I couldn't get my head around what shape to cut for the "cup" part, so I sacrificed an old bra to get an idea for that. Then I marked circles and with two layers of calico and a layer of the thin wadding between, I stitched like a mad thing around all the circles.

 

Then I had to close up where the V opening was (to make a dart) and bob's your uncle: two cones.

 

I'd bought a super-cheap e-bay corset thingy because I'd originally thought I might sew the parts to it but that idea went by the wayside. What it did give me was an idea of the shapes to cut out. Which I stitched fast and furious to get that quilted look.

  

Then I finished the edges with bias binding and put in a zip to do it up the front. Some heavy ribbon for straps, smaller ribbon and suspender clips, and a few little bows finished it off.

      

The full costume had suit trousers and a jacket for modesty (with a couple of slashes - ha!).

 

And the concert was a blast!

     

Cutwork bookmarks...

..using free-motion stitching!

These cutwork bookmarks use free motion stitching and three layers of fabric.

Woollen blankets revived

In furnishing this time.

I needed to get my dining chairs recovered. They'd come from the farm and you could tell...

Scarf - felted, woollen and upcyled!

I love old jumpers: real jumpers made with real wool and perfect for recycling!  I've found that they can take a bit of hunting for, but with a number piling up, I started on my scarf project...

 

Fabric storage basket using recycled denim

A quick and interesting way to use an old pair of jeans - and a cheap source of fabric.

Photo by Sarah Ryan

Start with an old pair of jeans and cut off a portion off the bottom.

Bag: re-using a woollen blanket

I love the old check woollen blankets, and I have been stashing a few. Last week, I discovered that my every-day bag was disintegrating, and new ones that I looked at were so expensive! So I got to, and decided to put one of my old blankets to good use (this one I'd picked up for $2 at an Op Shop in the doggy blanket section).

Photo by Sarah Ryan

So I made a template from my old bag, and cut out two on the bias (diagonally), and two from a contrast fabric for the lining. Then I added an extra piece to make an inside pocket. 

Appliqué scarf

Appliqué:  [Pronunciation: ap-li-kay]   (n.) ornamentation, as a cutout design, that is sewn on to or otherwise applied to a piece of material (Source: OED online. Oxford University Press, March 2015. Web. 17 April 2015)

Now I am a bit of a scarf fan...so making another scarf was inevitable really...

 

 Photo by Sarah Ryan

So....I just happened to buy 50cm of cheesecloth, and 20cm of a white lace fabric.